The most common brake pad problem!
As a key safety part of the car, the brake pad should be paid special attention to by car owners in the key points of daily use and maintenance. Today, car accessories will explain the common fault phenomena of brake pads with you, so as to facilitate you to find problems and avoid unnecessary losses.
The first is that the brake pad has cracks, which will lead to uneven wear of the brake pad. It is easy to make abnormal noise and vehicle offset when braking. It is mainly because the brake caliper is stuck and the piston leads to the bending and variation of the back plate. At this time, it needs to be replaced in time.
In another case, there are some oil stains on the brake pads, which will lead to the decline of braking and deviation during braking. Check the causes of pollution in time and replace the brake pads if necessary. If the brake pads are rusted, there will be obvious noise at this time, and the foot will feel soft when stepping on the brake. In case of serious corrosion, the brake pads must be replaced to ensure driving safety.
If the part of the brake pad is burnt or the friction material is ablated, and the edge is white, it is easy to become brittle and fracture, which is easy to cause the brake pad to be in a high temperature state for a long time. If the wear is serious, it must be replaced in time